MINY / PRODUCTS
PET BLOW MOLDING
MG-90 semi-automatic PET blow molding machine with 1 cavities for containers up to 25L. View model specifications and request a quote.
PRODUCT / MG-90
MG-90 Semi-Automatic PET Blow Molding Machine
MG-90 is a semi-automatic stretch blow molding machine in the Semi-automatic PET range. It is specified for containers up to 25L, with the exact bottle size and output determined by the mold and production setup.
- Operation
- Semi-automatic
- Maximum container volume
- 25L (tooling dependent)
- Mold cavities
- 1
- Reference output
- 120 BPH (theoretical)
- Neck diameter
- 65 mm
Catalogue equipment photo for MG-90.
PRODUCT DETAILS
Product Overview
MG-90 is intended for large PET water bottles and 5-gallon containers. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
The MG-90 is presented for 5-gallon packaging applications, with a catalogue maximum container volume of 25L. Its enclosure includes a safety-door arrangement.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- A semi-automatic stretch blow molding process uses a separate preform oven.
- Preform, neck finish and mold dimensions are selected for the required container.
- Air preparation and compressor equipment are sized for the production line.
- For models with alternative cavity arrangements, output depends on the selected bottle volume.
Technical Specifications
| Parameter | Unit | MG-90 |
|---|---|---|
| Container material | — | PET |
| Clamping force | t | 30 |
| Clamping stroke | mm | 330 |
| Maximum stretching stroke | mm | 450 |
| Mold cavities | — | 1 |
| Theoretical output | BPH | 120 |
| Maximum mold thickness | mm | 380 |
| Space between tie bars | mm | 480 × 550 |
| Heating zones | sections | 2 |
| Total power at full load | kW | 15 |
| Maximum container volume | L | 25 |
| Neck diameter | mm | 65 |
| Maximum container diameter | mm | 330 |
| Maximum container height | mm | 550 |
| Low-pressure air compressor reference | bar | 8-10 |
| High-pressure air compressor reference | bar | 30 |
| Air dryer reference | — | 2.0 / 30 |
| Machine dimensions (L × W × H) | m | 1.55 × 0.82 × 2 |
| Preform oven dimensions (L × W × H) | m | 2.52 × 0.68 × 1.55 |
| Net weight | t | 1.4 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
- Air-dryer reference values are retained from the equipment specification; confirm units and final air-treatment sizing.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.