MINY / PRODUCTS
PET BLOW MOLDING
MG-E6M automatic PET blow molding machine with 6 cavities for containers up to 1.5L. View model specifications and request a quote.
PRODUCT / MG-E6M
MG-E6M Automatic PET Blow Molding Machine
MG-E6M is an automatic linear stretch blow molding machine in the MG-E economic series. It is specified for containers up to 1.5L, with the exact bottle size and output determined by the mold and production setup.
- Operation
- Automatic linear
- Maximum container volume
- 1.5L (tooling dependent)
- Mold cavities
- 6
- Reference output
- 11000 BPH (theoretical)
- Neck diameter
- 32 mm
MG-E economic series reference photo. Machine appearance varies by model.
PRODUCT DETAILS
Product Overview
MG-E6M is intended for water, juice and other beverage bottles. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- An economic two-stage automatic stretch blow molding layout is used for bottle production.
- The preform heating arrangement and machine layout are coordinated for the selected bottle.
- The series introduction covers PET and PP applications with suitable preforms and tooling.
- Heating-zone and power configurations vary by model.
Technical Specifications
| Parameter | Unit | MG-E6M |
|---|---|---|
| Clamping force | t | 70 |
| Clamping stroke | mm | 120 |
| Maximum stretching stroke | mm | 350 |
| Bottom moving stroke | mm | 40 |
| Mold cavities | — | 6 |
| Theoretical output | BPH | 11000 |
| Maximum mold thickness | mm | 250 |
| Heating zones | sections | 4 |
| Total power at full load | kW | 96 |
| Maximum container volume | L | 1.5 |
| Neck diameter | mm | 32 |
| Maximum container diameter | mm | 90 |
| Maximum container height | mm | 320 |
| Low-pressure air compressor reference | bar | 8-10 |
| High-pressure air compressor reference | bar | 30-35 |
| Machine dimensions (L × W × H) | m | 4.05 × 1.85 × 1.8 |
| Preform oven dimensions (L × W × H) | m | 2.5 × 1.6 × 2.8 |
| Net weight | t | 5.5 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.