MINY / PRODUCTS
PET BLOW MOLDING
MG-JAR700 semi-automatic PET blow molding machine for containers up to 6L. Compare bottle sizes, cavity configurations and output. Request a quote.
PRODUCT / MG-JAR700
MG-JAR700 Semi-Automatic PET Jar Blow Molding Machine
MG-JAR700 is a semi-automatic stretch blow molding machine for wide-mouth PET jars. Its small-container and large-container configurations use different cavity counts and production rates.
- Operation
- Semi-automatic
- Maximum container volume
- 6L (tooling dependent)
- Mold cavities
- 2 (small jars) / 1 (large jars)
- Reference output
- 700 (0.1-2.5 L) / 380 (3-6 L) BPH (configuration dependent)
- Neck diameter
- 15-120 mm
Catalogue equipment photo for MG-JAR700.
PRODUCT DETAILS
Product Overview
MG-JAR700 is intended for wide-mouth PET jars. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
The jar sealing arrangement accommodates different neck finishes. The listed neck diameter range is 15-120 mm; the mold and preform interface are matched to the selected jar.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- A semi-automatic stretch blow molding process uses a separate preform oven.
- Preform, neck finish and mold dimensions are selected for the required container.
- Air preparation and compressor equipment are sized for the production line.
- For models with alternative cavity arrangements, output depends on the selected bottle volume.
Technical Specifications
| Parameter | Unit | MG-JAR700 |
|---|---|---|
| Container material | — | PET |
| Clamping force | t | 20 |
| Clamping stroke | mm | 230 |
| Maximum stretching stroke | mm | 380 |
| Mold cavities | — | 2 (small jars) / 1 (large jars) |
| Theoretical output | BPH | 700 (0.1-2.5 L) / 380 (3-6 L) |
| Maximum mold thickness | mm | 300 |
| Space between tie bars | mm | 380 × 500 |
| Heating zones | sections | 2 |
| Total power at full load | kW | 6 |
| Maximum container volume | L | 0.1-2.5 (2 cavities) / 3-6 (1 cavity) |
| Neck diameter | mm | 15-120 |
| Maximum container diameter | mm | 35-220 |
| Maximum container height | mm | 450 |
| Low-pressure air compressor reference | bar | 8-10 |
| High-pressure air compressor reference | bar | 30 |
| Air dryer reference | — | 1.2 / 30 |
| Machine dimensions (L × W × H) | m | 1.48 × 0.6 × 2.13 |
| Preform oven dimensions (L × W × H) | m | 1.37 × 0.61 × 1.34 |
| Net weight | t | 0.82 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Bottle Volume and Cavity Configurations
| Bottle volume (L) | Mold cavities | Theoretical output (BPH) |
|---|---|---|
| 0.1-2.5 | 2 | 700 |
| 3-6 | 1 | 380 |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
- Air-dryer reference values are retained from the equipment specification; confirm units and final air-treatment sizing.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.