MINY / PRODUCTS
PET BLOW MOLDING
MG-SS8SF automatic PET blow molding machine with 8 cavities for containers up to 0.75L. View model specifications and request a quote.
PRODUCT / MG-SS8SF
MG-SS8SF Automatic PET Blow Molding Machine
MG-SS8SF is an automatic linear stretch blow molding machine in the MG-SS linear series. It is specified for containers up to 0.75L, with the exact bottle size and output determined by the mold and production setup.
- Operation
- Automatic linear
- Maximum container volume
- 0.75L (tooling dependent)
- Mold cavities
- 8
- Reference output
- 14000 BPH (theoretical)
- Neck diameter
- 32 mm
MG-SS linear series reference photo. Machine appearance varies by model.
PRODUCT DETAILS
Product Overview
MG-SS8SF is intended for still-water and carbonated-drink bottles. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- A linear reheat stretch blow molding process is used for preformed PET containers.
- Cast mold platens and an optimized clamping arrangement support stable mold locking.
- Zoned infrared heating with ventilation supports controlled preform conditioning.
- Continuous preform feeding can be adapted to different neck finishes.
- Servo-driven stretching is optional; confirm the selected stretching configuration.
Technical Specifications
| Parameter | Unit | MG-SS8SF |
|---|---|---|
| Container material | — | PET |
| Clamping force | t | 45 |
| Clamping stroke | mm | 90 |
| Maximum stretching stroke | mm | 320 |
| Bottom moving stroke | mm | 70 |
| Mold cavities | — | 8 |
| Theoretical output | BPH | 14000 |
| Maximum mold thickness | mm | 200 |
| Heating zones | sections | 6 |
| Total power at full load | kW | 100 |
| Maximum container volume | L | 0.75 |
| Neck diameter | mm | 32 |
| Maximum container diameter | mm | 70 |
| Maximum container height | mm | 220 |
| Low-pressure air compressor reference | — | 2.0 / 10 bar |
| High-pressure air compressor reference | — | 10.0 / 30 bar |
| Machine dimensions (L × W × H) | m | 5.4 × 2.1 × 2.3 |
| Preform autoloader dimensions (L × W × H) | m | 2.5 × 1.8 × 2.7 |
| Net weight | t | 9 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
- Confirm compressor flow units and final air-supply sizing with the production-line configuration.
- Servo stretching is optional and is specified separately from the base machine configuration.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.