MINY / PRODUCTS
PET BLOW MOLDING
MG-SS1L automatic PET blow molding machine with 1 cavities for containers up to 6L. View model specifications and request a quote.
PRODUCT / MG-SS1L
MG-SS1L Automatic PET Blow Molding Machine
MG-SS1L is an automatic stretch blow molding machine in the MG-SS large-container range. It is specified for containers up to 6L, with the exact bottle size and output determined by the mold and production setup.
- Operation
- Automatic
- Maximum container volume
- 6L (tooling dependent)
- Mold cavities
- 1
- Reference output
- 600 BPH (theoretical)
- Neck diameter
- 50 mm
Container application reference. A model-specific machine photograph is available on request.
PRODUCT DETAILS
Product Overview
MG-SS1L is intended for large PET water bottles and food-and-beverage containers. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
The MG-SS1L configuration lists 1 mold cavities, a 6L maximum container volume and a theoretical output of 600 bottles per hour.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- A reheat stretch blow molding process accommodates large PET containers.
- Container volume, neck diameter and bottle dimensions are checked against the model limits.
- The L, EL and EXL ranges offer different capacity and cavity combinations.
- Preform heating and mold selection are matched to the required large-container geometry.
Technical Specifications
| Parameter | Unit | MG-SS1L |
|---|---|---|
| Container material | — | PET |
| Clamping force | t | 50 |
| Clamping stroke | mm | 220 |
| Maximum stretching stroke | mm | 500 |
| Bottom moving stroke | mm | 70 |
| Mold cavities | — | 1 |
| Theoretical output | BPH | 600 |
| Maximum mold-base area | mm | 500 × 350 |
| Maximum mold thickness | mm | 290 |
| Heating zones | sections | 5 |
| Total power at full load | kW | 60 |
| Maximum preform length | mm | 180 |
| Preform diameter | mm | 55 |
| Maximum container volume | L | 6 |
| Neck diameter | mm | 50 |
| Maximum container diameter | mm | 190 |
| Maximum container height | mm | 350 |
| Machine dimensions (L × W × H) | m | 2.5 × 1.5 × 2.12 |
| Preform autoloader dimensions (L × W × H) | m | 2 × 1.3 × 2.5 |
| Net weight | t | 4.5 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.