MINY / PRODUCTS
PET BLOW MOLDING
MG-SSH4 PET handle bottle blow molding machine with 4 cavities and 2.5L maximum container volume. View specifications and request a quotation.
PRODUCT / MG-SSH4
MG-SSH4 PET Handle Bottle Blow Molding Machine
MG-SSH4 is an automatic stretch blow molding machine in the PET handle-bottle range. It is specified for containers up to 2.5L, with the exact bottle size and output determined by the mold and production setup.
- Operation
- Automatic
- Maximum container volume
- 2.5L (tooling dependent)
- Mold cavities
- 4
- Reference output
- 2000 BPH (theoretical)
- Neck diameter
- 50 mm
Container application reference. A model-specific machine photograph is available on request.
PRODUCT DETAILS
Product Overview
MG-SSH4 is intended for handled bottles for edible oil, pharmaceutical and agrochemical packaging. The specification below lists this model's container envelope, motion settings and supporting equipment dimensions.
Applications
Application examples illustrate container types. Match the final bottle dimensions, neck finish and preform to this model and its tooling.
Machine Features
- Matched molds and localized air cooling support handled PET bottle designs.
- Bottle preforms, neck finishes and handle geometry are matched to the selected tooling.
- The catalogue also describes post-insertion handle equipment as a separate production option.
- Handle insertion and cooling arrangements are confirmed for the required bottle.
Technical Specifications
| Parameter | Unit | MG-SSH4 |
|---|---|---|
| Container material | — | PET |
| Clamping force | t | 45 |
| Clamping stroke | mm | 130 |
| Maximum stretching stroke | mm | 340 |
| Bottom moving stroke | mm | 25 |
| Mold cavities | — | 4 |
| Theoretical output | BPH | 2000 |
| Maximum mold-base area | mm | 940 × 350 |
| Maximum mold thickness | mm | 260 |
| Heating zones | sections | 8 |
| Total power at full load | kW | 85 |
| Maximum preform length | mm | 180 |
| Preform diameter | mm | 50 |
| Maximum container volume | L | 2.5 |
| Neck diameter | mm | 50 |
| Maximum container diameter | mm | 140 |
| Maximum container height | mm | 320 |
| Machine dimensions (L × W × H) | m | 4.8 × 2.2 × 2.2 |
| Preform autoloader dimensions (L × W × H) | m | 2 × 1.2 × 2.2 |
| Net weight | t | 8 |
| Power supply | — | 380 V / 3-phase / 50 Hz; other supplies on request |
Production and Configuration Notes
- Output is a theoretical reference. Actual production depends on bottle design, preform, resin, mold, air supply and operating settings.
- Maximum bottle volume, body diameter and height define separate limits; confirm the complete container design before selecting the mold.
For a model recommendation or quotation, provide the bottle drawing, neck finish, preform details, material and required output.
Related
Products.
VIEW ALL PRODUCTS 
START A CONVERSATION
Tell us what
you are planning
to produce.
Share your product, output and production requirements. Our team will help you find the right configuration.